Engineering components refer to concrete components used in various construction projects. The automatic production line of engineering components (referred to as the component production line) is a high-quality concrete product production line designed and manufactured by Qunfeng independently. Has complete independent intellectual property rights.
| Quantity: | |
|---|---|
Engineering Component Production Line
QUNFENG
Product Description
Main process parameters
| Annual output | more than 100,000 meters (take 2m water trench as an example) |
| Production time | Two shifts per day, 8 hours per shift, 300 working days/year |
| Cycle time | less than 10 minutes / mold |
| Curing system | Steam curing at 60-80℃; can also be cured naturally |
| Demoulding time | about 8 hours (steam curing) |
Engineering components refer to concrete components used in various construction projects. The automatic production line of engineering components (referred to as the component production line) is a high-quality concrete product production line designed and manufactured by Qunfeng independently. Has complete independent intellectual property rights.
The component production line adopts technologies such as servo high-frequency strong vibration, forced exhaust compaction, digital automatic control, and modular design, which is suitable for the production of various engineering concrete components such as water trenches, slope protection blocks, roadbed blocks, curb stones, and ecological hydraulic blocks.
The components produced by this production line have the advantages of large size, low construction cost, various structural forms, wide adaptability, diverse appearance, high strength, freeze-thaw resistance, etc., and are widely used in road engineering, landscaping engineering, water conservancy engineering, ecological protection engineering. and other projects.
Main technical features
Complete supporting facilities and high degree of automation: The production line is mainly composed of batching and mixing system, distribution system, vibration system, automatic conveying and circulation system, maintenance system and control system, product molds, etc., complete supporting facilities and high degree of automation;
Large-volume component technology: The component has a large volume, high construction efficiency and low cost.
High frequency servo vibration system: compact products, high efficiency, good exhaust effect;
Special feeding system: realize rapid layered feeding of concrete;
High utilization rate of solid waste: It can consume a large amount of industrial and construction waste, such as fly ash, tailings sand and other solid waste;
Modular design: Customers can customize production lines with different capacities and degrees of automation according to their needs;
Green and environmental protection: The production line basically has no three wastes discharge, which meets the environmental protection requirements, and the project site selection has a wider range of adaptation;
Flexible investment: you can quickly produce appropriate products with a small investment, and you can also invest appropriately to manufacture and build products in batches;
Diversification of products: Concrete products with different structure sizes and different appearance effects can be produced only by changing the mold.
Process flow
Product Application
Ecological Box |
Ecological Box |
Ecological Box |
Ecological Box |
Ecological Box |
Ecological Box |
Paving Stone Series
 Subgrade Block |
Water Trench |
Water Trench |
Water Trench |
Water Trench |
Slope-protect Brick Series
Slope Protection Block |
Slope Protection Block |
Slope Protection Block |
Slope Protection Block |
